Auto Ink Glue Viscosity Regulator for Printing Controller 20L-40L Bml-S-10/Bml-S-15/ Bml-S-20

• Customization: Available
• After-sales Service: Video
• Warranty: 6 Mouths
• Model NO.: BML-S-10/BML-S-15/ BML-S-20
• Certification: EMC
• Rated Current: 220V 40W
• Voltage: 220V
• Material: 304 Stainless Steel
• Power: Electric
• Valve Body Type: 304 Stainless Steel
• Diaphragm Material: Pfte
• Performance: Explosion
• Circulation Volume: 1.5-4.5L/Min,3.5-9L/Min,7.5-19L/Min
• Working Pressure: 0.3MPa
• Suitable for: Gravure, Flexographic Printing, Composite, Coating
• Useage: Liquid Viscosity Control,Solvent Recharge Cycle
• Transport Package: Stronge Carton Box
• Specification: 340*330*1070mm
• Trademark: BML
• Origin: China
• HS Code: 9027809900
• Production Capacity: 1000PCS Per Month

Product Description

                                                                      Ink and glue viscosity controller

Brand: BML
Product name: viscosity controller
Origin: China
Model: S-10/S-15/S-20
Suitable for industry: intaglio, flexo printing, composite, coating
Purpose: liquid viscosity stability control test and solvent replenishment cycle

Product advantage

1.All-round early warning system (Industry initiation) :
(1) Viscosity over-limit alarm: When the difference between the actual viscosity value and the setting viscosity value exceeds the limit, it alarms.
(2) Low ink alarm: When the ink in the tank is low, it alarms and reminds the staff to add the solvent.
(3) Low solvent alarm: When the solvent in the solvent is insufficient, it alarms and reminds the staff to add the solvent.
(4) Low air source alarm: Cause the viscosity detection depends on the frequency of the pump, low air source will effect the detection accuracy. If it happens, the system stops controlling, then alarms at the same time.


2.Self-lubricating system and patent High-pressure refueling valve ensure the refueling smoothly. With high-precision filter, 99.9% of the lubricating oil can be smoothly recycled.
Automatically lubricating ,effectively prolong the working life of machine and keeps the accuracy. Recycling lubricating oil, keeps enough lubricating oil and easier to maintain machine.


3.Speed cleaning system 10 seconds. It takes only 10 seconds to complete the cleaning.

4.Anti-collision design: Protect all exposed connectors from damage caused by transportation and equipment movement.

5.Pulse detection method has special requirements for diaphragm pump, its sensitivity and fatigue resistance are much higher than that of general delivery diaphragm pump. New S-type diaphragm pump is applied to provide technical guarantee and reduce maintenance cost!

Application:

1. Gravure printing and flexo printing: food package printing,plastic bag printing, PVC calico paper printing and all kinds of plastic package peinting.
2. Laminating: food plastic package laminating,paper laminating and rubber laminating
3. Coating: fit for bank card,negative,film,Polaroid,car decorating and all kinds of substrate coating.
4. 4.Other use: all kinds of industry which is required for liquid viscosity consistency.

 

 Model:BML-S -10
Appearance: 304 stainless steel
Dimension:340*330*1070mm
Control range:No.3/No.4 Zahn Cup 13-30 sec /30-1000cps
Solvent tank:304 Stainless steel, detachable box
In-tube:6.5*10mm*2.5m
Out-tube:8*12 mm*2.5m
Control precision:1.5-4.5L/min
Air consumption:40L/min
Working pressure:0.3Mpa
Application:Roto-gravure or Flexo Printing
(Sub Tank under 20L)



 

 

 Model:BML-S -15
Appearance: 304 stainless steel
Dimension:340*330*1070mm
Control range:No.3/No.4 Zahn Cup 13-30 sec /30-1000cps
Solvent tank:304 Stainless steel, detachable box
In-tube:8*12 mm*2.5m
Out-tube:11*16 mm*2.5m
Control precision:3.5-9L/min
Air consumption:90L/min
Working pressure:0.3Mpa
Application:Roto-gravure or Flexo Printing,Laminating, Coating(Sub Tank under 40L)

 

Model:BML-S -20
Appearance: 304 stainless steel
Dimension:340*330*1070mm
Control range:No.3/No.4 Zahn Cup 13-30 sec /30-1000cps
Solvent tank:304 Stainless steel, detachable box
In-tube:11*16 mm*2.5m
Out-tube:15*21mm*2.5m
Control precision:7.5-19L/min
Air consumption:160L/min
Working pressure:0.3Mpa
Application:Roto-gravure or Flexo Printing,Laminating, Coating(Sub Tank over 40L)
 

Specification reference: 
 

Model	S -10	S -15	S -20
Appearance	304 stainless steel
Dimension	340*330*1070mm
Net weight	30kg	32kg	35kg
Control range	No.3/No.4 Zahn Cup 13-30 sec /30-1000cps
Solvent tank	304 Stainless steel, detachable box
In-tube	6.5*10mm*2.5m	8*12 mm*2.5m	11*16 mm*2.5m
Out-tube	8*12 mm*2.5m	11*16 mm*2.5m	15*21 mm*2.5m
Control precision	1.5-4.5L/min	3.5-9L/min	7.5-19L/min
Air consumption	40L/min	90L/min	160L/min
Working pressure	0.3Mpa
Working voltage	220V,40W
Application	Roto-gravure or Flexo Printing (Sub Tank under 20L)	Roto-gravure or Flexo Printing,Laminating, Coating(Sub Tank under 40L)	Roto-gravure or Flexo Printing,Laminating, Coating(Sub Tank over 40L)