Bml-10V Viscosity Controller, Suitable for Printing Ink/Glue Industry

• Customization: Available
• After-sales Service: Video
• Warranty: 6 Mouths
• Model NO.: BML-10V
• Certification: ISO9001
• Usage: Ink Viscosity Regulator
• Category: Controller
• Function: Ink Viscosity Regulator
• Type: Explosion-Proof
• Dimension: 760*350*280mm
• Working Voltage: 220V
• Max. Volume of Tank: 20L
• Working Pressure: 0.4MPa
• Circulation Volume: 3.9~15 L/Min
• Control Range: No.3:13~30s
• Air Consumption: 40 Liters/Min
• Suitable for: Intaglio Printing, Flexographic Printing, Glue
• Transport Package: Carton Box
• Specification: BML-10V
• Trademark: Glorythai
• Origin: China
• HS Code: 8479820090
• Production Capacity: 3000 PCS / Month

Product Description

                                                                            Ink ,Glue viscosity controller
 
Function Specification
The machine is suitable for printing industry to automatically dilute the viscosity of the ink, and glue.Easy to use , no need manual adjust the ink,only need to set the viscosity value,according to the product requirement. Pulse detector testing viscosity, Pneumatic diaphragm pump cycle ink and glue. Safe&reliable, accurate detection of viscosity. Using viscosity controller automatic tracking& monitoring to make the viscosity consistent when printing, lamination, coating .

Principle of operation
The Viscosity controller use the pulse detection way to detect the ink viscosity, through the built-in pneumatic double diaphragm pump operation to determine the high and low of the viscosity. Evaporation of the solvent can lead to high viscosity of liquid.While  adding solven will make the viscosity of the liquid is low. When the viscosity of the liquid becomes high, The diaphragm pump operation load increases, the beat frequency of the diaphragm pump can become low at this time . When the viscosity of the liquid become low, the diaphragm pump operation load will reduce, then the beat frequency of the diaphragm pump get higher.

Product function and feature

1. Single unit can complete printing ink circulation, mixing, viscosity control
2. Improve the printing color consistency, greatly reduce the defect and guarantee the quality of the products
3. Timely to add solvent, sharply reduce the ink consumption  up to 15 ~ 20%, effectively reduce the printing cost
4. Accurate control of viscosity, printing operators do not need to worry about viscosity change, can put more attention on other printing problems, also can save the manpower. Stable ink viscosity reduce printing defects.
5. The pump frequency (hz) as control unit, ensure the precise of the control precision
6. The equipment of pipe for the ink, solvent is pneumatic control valve, more efficient, safe and reliable.
7. Simple way of equipment maintenance, as long as half a gallon of solvent and one minute of time, can complete cleaning equipment
8. Using large digital display, easy observation, operation set, easy to adjust
9. Use automatic lubrication and oil recycling system, extend the service life of the diaphragm pump 3 times
10. Ink hose using special material more soft, strong recovery, not deformation, not distention
11. Compact  structure, lightweight, easy to carry and install
12. Pneumatic diaphragm pump cycle ink is safe and reliable

Application:

1. Gravure printing and flexo printing: food package printing,plastic bag printing, PVC calico paper printing and all kinds of plastic package peinting.
2. Laminating: food plastic package laminating,paper laminating and rubber laminating
3. Coating: fit for bank card,negative,film,Polaroid,car decorating and all kinds of substrate coating.
4. 4.Other use: all kinds of industry which is required for liquid viscosity consistency.

 

Function Specification
The machine is suitable for printing industry to automatically dilute the viscosity of the ink, and glue.Easy to use , no need manual adjust the ink,only need to set the viscosity value,according to the product requirement. Pulse detector testing viscosity, Pneumatic diaphragm pump cycle ink and glue. Safe&reliable, accurate detection of viscosity. Using viscosity controller automatic tracking& monitoring to make the viscosity consistent when printing, lamination, coating .

Technique parameters:

Model	BML-10V	BML-15V	BML-20V
Dimension	760*350*280mm	760*350*280mm	780*380*300mm
Appearance	304 Stainless Steel	304 Stainless Steel	304 Stainless Steel
Net Weight	19kg	21kg	25kg
Control Range	NO.3:13~30s	NO.3:13~30s
		NO.4:13~50s	NO.4:13~50s
Control Precision	0.5s	0.5s	0.5s
Suction Hose	11*8mm*2m	14*10mm*2.3m	25*19mm*2.5m
Delivery Hose	10*6.5mm*2m	11*8mm*2.3m	25*16mm*2.5m
Circulation Volume	3.9~15 L/min	8.8~35 L/min	19~54 L/min
Air Consumption	40 L/min	90 L/min	160 L/min
Working Pressure	0.4MPa (Or: 4kg/ 4Bar)	0.5MPa (Or: 5kg / 5Bar)	0.6MPa (Or: 6kg / 6Bar)
Working Voltage	220V	220V	220V
Max.Volume of Sub-tank	20L	40L	80L