It is the most widely used viscosity cup in China, designed according to GB/T 1723, suitable for measuring the conditional viscosity of coatings and other related products (outflow time is not more than 150 seconds). Under a certain temperature condition, the time for measuring the quantitative sample to flow out of the specified diameter of the hole is expressed in S.
suitable for measuring the viscosity of coating products
Note: If you need to convert the outflow time (S) to the kinematic viscosity centiss (mm2/s), please refer to the following formula:
t=0.154v+11 (t<23 s) or t=0.223 v+6.0 (23 s≤t<150 s)
t- Discharge time (s) v- Motion viscosity (mm2/s)
Application
Use: The instrument is suitable for measuring the viscosity of coating products in 30s to 100s, which is a portable instrument to measure the viscosity of coating, that is, after the measured liquid is full, the required time to measure the flow from the hole.
Brief description of structure: The viscosity cup is placed on a measuring cup ring with a horizontal bubble, and the horizontal screw on the base is adjusted so that the bubble is centered. The capacity of the holding cup is about 150 ml.
Audited Supplier 
){kind=link}