Japan Mitsubishi Tension Control Le-50 Pau

• Customization: Available
• Certification: CE
• Category: Tension Control System
• Model NO.: LE-50PAU
• Power Supply in Put: AC100~240V (-15~+10%) 50/60Hz
• Installation Method: The Ground, Metope Installed
• Features: Constant Current, Constant Voltage Control
• Ambient Humidity: 30~85%Rh (No Gel)
• Ambient Temp: 0~55 Degree
• Transport Package: Carton Box
• Specification: LE - 50 PAU
• Trademark: Mitsubishi
• Origin: Japan
• HS Code: 9032899090
• Production Capacity: 3000 PCS / Month

Product Description

Specifications

Main applications
< Power amplifier for tension control >
• The power amplifier is used in combination with the closed-loop type tension control unit such as
LE-40MTA-E, LE-40MTB-E, LE-30CTN, etc. tension control unit to amplify the output signal or such control unit, and to apply the power source to the excitation coil of clutch / brake.
< Manual power source, using external setting type valuable resistor >
• The power amplifier will appear to be a variable current ( or variable voltage ) power source, using
manual operation simply by connecting the variable resistor (8V, 2kW ) to the imput terminal of this
power amplifier.
Since the non-linearity compensation is executed, the opration is easy.
< Semi-automatic tension control unit >
• As described in chapter-2 of this manual, the power amplifier can be also used as semi-automatic
tension control unit by using the LE-5AP operator panel in combination.
• the semi-automatic tension control unit is provided with winding diameter detection function whitch
is intended to ensure the desired tension by controlling the output current automatically in accordance
with the winding diameter. It can ensure the simplified open-loop control in whitch no tension
tetector is used.
• Using the LE-5AP operator panel described previously will also allow the basic characteristeic of
power amplifier to be set easily.
 
Specifications
 

Item		Specifications
Power Supply	Input	AC100~240V (-15~+10%) 50/60Hz  Power 400VA  Built-in power fuse 250V 8A Surge current 50A300ms
	Output	Potentiometer power--DC8V   Potentiometer resistance: 2 k Ω above Scroll sensor with the power source --DC12V   15 mA below
Contact signal	Input	start -ON→OFF,Stop the clock began to work, start inertia protection Output remote control---ON :Output start,OFF:Output stop Aux Out ON/OFF-----------ON: Begin to Aux Out	DC12V  5mA / 1 internal power supply
Analog signal	Input	Control signal ----0~8V  Internal resistance:22 KΩ
	Output	Power amplifier output --- DC24V   4A above Aux Out-DC10V   2A below  Within 30 seconds  Load resistance:4.8 Ωbelow
Weight		About 2.5kg
Installation method		The ground, metope installed
Features		Constant current, constant voltage control, torque nonlinear compensation function, stop timer, stop gain, stop bias
Environment	Ambient Temp	0~55ºC
	Ambient Humidity	30~85%RH (No gel)
	Shock resistant	10~55 Hz  0.5(Max19.6m/s²) Three axis directio each 2 times
	Impact resistance	98 m/s²  Three axis directio each three times
	Power supply Noise tolerance	According to the noise voltage 1000 vp - p, noise width 1 µ s, frequency 30 ~ 100 hz noise simulator	Between All terminal  and grounding terminal
	Voltage withstand	AC1500V  1 minute
	Insulation Resistance	DC500V  Megohmmeter measurement value is more than 5 m Ω
	Ground	Class D grounding line
	Use environment	No corrosive gas, flammable gas, electrical conductivity dust, no dust. No rain, water contact environment

 

Welcome to Contact with Us: