Circulation Volume 8.8~35 L/Min Explosion-Proof Automatic Ink Viscosity Controller

• Customization: Available
• After-sales Service: Video
• Warranty: 6 Mouths
• Model NO.: BML-10V / BML-15V / BML-20V
• Certification: EMC
• Rated Current: Pneumatic
• Voltage: Pneumatic
• Material: 304 Stainless Steel
• Power: Pneumatic
• Valve Body Type: Diaphragm
• Function: Viscosity Measure Machine
• Performance: Pneumatic
• Type: Explosion-Proof
• Dimension: 760*350*280mm
• Working Voltage: 220V
• Max. Volume of Tank: 20-40L
• Working Pressure: 0.4-0.6MPa
• Delivery Hose: 10mm*6.5mm*2m,11*8mm*2.3m,25*16mm*2.5m
• Suction Hose: 11mm*8mm*2m,14*10mm*2.3m,25*19mm*2.5m
• Control Precision: 0.5s
• Transport Package: Carton Box
• Specification: 304 Stainless Steel
• Trademark: Glorythai
• Origin: China
• HS Code: 8479820090
• Production Capacity: 3000 PCS / Month

Product Description

Function Specification

The machine is suitable for printing industry to automatically dilute the viscosity of the ink, and glue.Easy to use , no need manual adjust the ink,only need to set the viscosity value,according to the product requirement. Pulse detector testing viscosity, Pneumatic diaphragm pump cycle ink and glue. Safe&reliable, accurate detection of viscosity. Using viscosity controller automatic tracking& monitoring to make the viscosity consistent when printing, lamination, coating .
Principle of operation

The Viscosity controller use the pulse detection way to detect the ink viscosity, through the built-in pneumatic double diaphragm pump operation to determine the high and low of the viscosity. Evaporation of the solvent can lead to high viscosity of liquid.While  adding solven will make the viscosity of the liquid is low. When the viscosity of the liquid becomes high, The diaphragm pump operation load increases, the beat frequency of the diaphragm pump can become low at this time . When the viscosity of the liquid become low, the diaphragm pump operation load will reduce, then the beat frequency of the diaphragm pump get higher.

Product function and feature

1. Single unit can complete printing ink circulation, mixing, viscosity control
2. Improve the printing color consistency, greatly reduce the defect and guarantee the quality of the products
3. Timely to add solvent, sharply reduce the ink consumption  up to 15 ~ 20%, effectively reduce the printing cost
4. Accurate control of viscosity, printing operators do not need to worry about viscosity change, can put more attention on other printing problems, also can save the manpower. Stable ink viscosity reduce printing defects.
5. The pump frequency (hz) as control unit, ensure the precise of the control precision
6. The equipment of pipe for the ink, solvent is pneumatic control valve, more efficient, safe and reliable.
7. Simple way of equipment maintenance, as long as half a gallon of solvent and one minute of time, can complete cleaning equipment
8. Using large digital display, easy observation, operation set, easy to adjust
9. Use automatic lubrication and oil recycling system, extend the service life of the diaphragm pump 3 times
10. Ink hose using special material more soft, strong recovery, not deformation, not distention
11. Compact  structure, lightweight, easy to carry and install
12. Pneumatic diaphragm pump cycle ink is safe and reliable

BML-10V
Scope of use: gravure printing, auxiliary ink bucket capacity within 20L
Circulation volume 3.9~15 L/min
Features: Low cost conventional inks used in inks
Weight :49x36x82cm /29KG

BML-15V
Scope of use: gravure printing, auxiliary ink bucket capacity of more than 20L, 40L below
Suitable for glue compound
Circulation volume 8.8~35 L/min
Features: High cost performance
Large circulation, wide range of application, gravure printing white ink, spot color use, composite glue use
Weight :35KG /35*43*36CM

 

BML-20V
Scope of use: wood grain paper, wallpaper printing, auxiliary ink bucket more than 80LL/large area coating
Circulation volume 19~54 L/min
Features: Large circulation volume on the use
Weight :40KG /55*36*83cm

Application:

Model	BML-10V	BML-15V	BML-20V
Dimension	760*350*280mm	760*350*280mm	780*380*300mm
Appearance	304 Stainless Steel	304 Stainless Steel	304 Stainless Steel
Net Weight	19kg	21kg	25kg
Control Range	NO.3:13~30s	NO.3:13~30s
		NO.4:13~50s	NO.4:13~50s
Control Precision	0.5s	0.5s	0.5s
Suction Hose	11*8mm*2m	14*10mm*2.3m	25*19mm*2.5m
Delivery Hose	10*6.5mm*2m	11*8mm*2.3m	25*16mm*2.5m
Circulation Volume	3.9 L/min	8.8 L/min	19 L/min
Air Consumption	40 L/min	90 L/min	160 L/min
Working Pressure	0.4MPa	0.5MPa	0.6MPa
Working Voltage	220V	220V	220V
Max.Volume of Sub-tank	20L	40L	80L