Semi-Automatic Tension Control Device Mitsubishi LD-30FTA
Mitsubishi LD-30FTA
LD-30FTA tension controller is the Semi-Automatic tension control device used for total thickness measurement. This measurement method is pre-set the initial diameter and the material thickness. When the scroll rotates ,the initial diameter deduct the material thickness(unreeling) or add the material thickness (rolling) in order to calculate the current roll diameter.(set up the Proximity sensor for rotating on the scroll ). The calculate result output voltage 0-24V to the operator Magnetic powder clutch / Brake and hysteresis clutch. And output command voltage 0-5V to the servo motor amplifier
Feature:
Easily adjust and operate (control the tension )
Only need to set the tension and material thickness ,initial diameter can be controlled automatically
Compatibled the wide power between AC100V~240V
Can set the material thickness and initial diameter in the wide-range
Have the power-off protection function, even switch off the power can memory the current roll diameter
Support AC servo and many other kinds of executive machine
With the high functional mode can deal with All kinds of condition
Also for rolling taper control
Has the deceleration inertia compensation function
Clutch, brake torque nonlinear correction function
Mechanical loss correction function
Pursuit the ease of use
1.Can use Japanese, English and expression character display function
2.setting value through the dial operation mode
3.Built-in DIP switch to realize high functional mode and simple mode of switching function
4.Through the menu for eight set value memory function
5.Memory eight fixed running constant (material thickness, initial diameter, taper rate, etc.)
6. Equipped with lock key, can prevent maloperation and invalid function display
Can use ultrasonic sensors and touch bar
| Power supply |
AC85~264V 50/60HZ |
| Rated output |
DC24V 3A DC0~5V |
| Input signal |
DC12V Proximity switch (open) |
| Roll diameter setting range |
1~2000mm |
| Material setting range |
0.1~9999um |
| Display |
7 segment LED (control output current coil diameter, etc) |
| Control mode |
Taper tension Acceleration, deceleration inertia supplement
|
| Working environment |
Surrounding temperature: 0~+55°C
Surrounding humidity 35~85%
Concussion : 10~55HZ 0.5mm(Max0.5G)
Do not allow corrosiv,Flammable gas,Conductive dust and too much dust. |
| Weight |
About 3.5kg |
| Installation |
The ground, wall or screen installation |
| Optional Accessories |
If use ultrasonic induction or touch feeling, must configuration simulation tablet |
Please feel free to contact us ↓↓↓
Audited Supplier 
){kind=link}