Made in Switzerland Daetwyler MDC BlueStar Printing Machinery Doctor Blade
Bluestar----by Daetwyler SwissTec
THE NEW BLUESTAR DOCTOR BLADE FOR GRAVURE PACKAGING AND ILLUSTRATION PRINTING APPLICATIONS.
Daetwyler SwissTec now has developed the new BLUESTAR doctor blade specifically created to compensate for cylinder inaccuracies, which can create printability issues such as dragouts, hazing and broken doctor blades from bad cylinder ends .The blade tip is manufactured using a specialized process designed to promote stability and reduce wear at the contact point. This thin 60-micron tip increases only slowly and proportionally to the 3° angle. This flat beveled edge increases stability and reduces tip deflection caused by high blade pressure and fast press speeds.
This results in:
1. Lower blade pressure and blade wear
2. Eliminating blade breakage due to high cylinder ends
3. Eliminating dragouts
4. Longer life blade
5. Sharp blade edge to eliminate hazing
6. Less waste and reduced downtime.
Heat-treated blue carbon steel and a 30 bevel give the Bluestar durability, stability and a clean, crisp wipe.
1. The tip design promotes stiffness whilst retaining a small contact area
2. Great for short-run Flexo HD
3. Low cost
Blade thickness: |
Tip thickness: |
Blade width: |
0.150mm |
60 micron |
20-80 micron |
0.200mm |
0.250mm |
Please feel free to contact us ↓↓↓