| Customization: | Available |
|---|---|
| Certification: | CE |
| Condition: | New |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
MITSUBISHI ELECTRIC TENSION CONTROLLER LE-50PAU
| Item | Specifications | ||
| Power Supply | Input | AC100~240V (-15~+10%) 50/60Hz Power 400VA Built-in power fuse 250V 8A Surge current 50A300ms | |
| Output | Potentiometer power--DC8V Potentiometer resistance: 2 k Ω above | ||
| Scroll sensor with the power source --DC12V 15 mA below | |||
| Contact signal | Input | start -ON→OFF,Stop the clock began to work, start inertia protection | DC12V 5mA / 1 internal power supply |
| Output remote control--ON :Output start,OFF:Output stop | |||
| Aux Out ON/OFF--ON: Begin to Aux Out | |||
| Analog signal | Input | Control signal ----0~8V Internal resistance:22 KΩ | |
| Output | Power amplifier output --- DC24V 4A above | ||
| Aux Out-DC10V 2A below Within 30 seconds Load resistance:4.8 Ωbelow | |||
| Weight | About 2.5kg | ||
| Installation method | The ground, metope installed | ||
| Features | Constant current, constant voltage control, torque nonlinear compensation function, stop timer, stop gain, stop bias | ||
| Environment | Ambient Temp | 0~55ºC | |
| Ambient Humidity | 30~85%RH (No gel) | ||
| Shock resistant | 10~55 Hz 0.5(Max19.6m/s²) Three axis directio each 2 times | ||
| Impact resistance | 98 m/s² Three axis directio each three times | ||
| Power supply Noise tolerance | According to the noise voltage 1000 vp - p, noise width 1 µ s, frequency 30 ~ 100 hz noise simulator | Between All terminal and grounding terminal | |
| Voltage withstand | AC1500V 1 minute | ||
| Insulation Resistance | DC500V Megohmmeter measurement value is more than 5 m Ω | ||
| Ground | Class D grounding line | ||
| Use environment | No corrosive gas, flammable gas, electrical conductivity dust, no dust. No rain, water contact environment | ||
){kind=link}