Mitsubishi Automatic Tension Controller LE-30CTA
Original place: Japan
Brand: Mitsubishi
100% Quality Guarantee
Product Specification:
Power |
AC100~240V 50/60HZ 400VA |
The Input Signal Additional Output |
0~5V,0~8V,1~5V,0~Vmax (Vmax=0.5~8V adjustable) |
Rated Output |
DC24V 4A |
Subsidies Output |
DC10V 2A within 30sec |
Control Mode |
Voltage Feedback Control or Current Feedback Control (switchable) |
Working Atmosphere |
Ambient Temperature: 0~55°C
Ambient Humidness: 35~85%
Vibration: 0.5mm (maximum 2G)
Environment: Not allow corrosive gas, dust and rainwater |
Installation Mode |
Panel Install |
Weight |
About 2.5kg |
Main applications:
< Power amplifier for tension control >
The power amplifier is used in combination with the closed-loop type tension control unit such as
LE-40MTA-E, LE-40MTB-E, LE-30CTN, etc. tension control unit to amplify the output signal or such
control unit, and to apply the power source to the excitation coil of clutch / brake.
< Manual power source, using external setting type valuable resistor >
The power amplifier will appear to be a variable current ( or variable voltage ) power source, using
manual operation simply by connecting the variable resistor (8V, 2kW ) to the imput terminal of this
power amplifier.
Since the non-linearity compensation is executed, the opration is easy.
< Semi-automatic tension control unit >
As described in chapter-2 of this manual, the power amplifier can be also used as semi-automatic
tension control unit by using the LE-5AP operator panel in combination.
the semi-automatic tension control unit is provided with winding diameter detection function whitch
is intended to ensure the desired tension by controlling the output current automatically in accordance
with the winding diameter. It can ensure the simplified open-loop control in whitch no tension
tetector is used.
Using the LE-5AP operator panel described previously will also allow the basic characteristeic of
power amplifier to be set easily.
Welcome to Contact Us: