Diaphragm Pumps Bml-5, Suitable for Use in Flammable and Explosive Environments Diameter: 1/4"Flow Rate: 10L/Min

• Customization: Available
• After-sales Service: Video
• Warranty: 6 Months
• Model NO.: BML-5
• Certification: EMC
• Rated Current: Pneumatic
• Voltage: Pneumatic
• Material: Aluminum Alloy
• Power: Pneumatic
• Valve Body Type: Diaphragm
• Function: Pneumatic
• Diaphragm Material: PTFE
• Performance: Corrosion
• Color: Silver
• Material of Pump′s Body: Aluminum Alloy
• Material of Diaphragm: PTFE
• Caliber Diameter Inlet or Outlet: 1/4"
• Flux: 10L/Min
• Air Supply Pressure: 0.5MPa
• Solid Particle Limit: 2mm
• Feature: Suitable for Use in Flammable and Explosive Enviro
• Advantage: Diaphragm Pump Is Small, Light and Easy to Move
• Application: Used for All-Based Ink Printing Machine, Gravure
• Transport Package: Carton Box
• Specification: good quality
• Trademark: Glorythai
• Origin: China
• HS Code: 8413501090
• Production Capacity: 3000 PCS / Month

Product Description

     Single Way Pneumatic Diaphragm Pump 5#

Description:
Pneumatic diaphragm pump is a new conveying machine, which is the latest novel kind of pump. Compressed air as the power source, it can be use in any corrosive liquid, liquid with particle, high viscosity, easy volatile, inflammable, highly toxic liquid.
There are four materials in Pneumatic Diaphragm Pump: plastic, aluminum alloy, cast iron and stainless steel. The diaphragm pump will adopt Buna-N rubber, Chloroprene rubber, fluororubber,PTFE, according to the different liquid and to meet customers' need. Place in all kinds of special occasion; use to pumping the medium which the general pump cannot do so. And it is gain a satisfied effect.
Thus the above features that pneumatic pump possessed, this kind of pump is gradually invaded other pump market when it is born and cover a part of it. Such as painting, ceramic industry, printing industry, the pneumatic pump has an absolute dominant position.
Features:

1. Because it is using air as power, the diaphragm pump does not heat and produce sparks; suitable for use in flammable and explosive environment.
2. Use PTFE diaphragm, can be used for chemical properties relatively volatile liquid, corrosive medium.
3. Diaphragm Pump can pump particle liquid;
4. The liquid can be conveyed by diaphragm pump is wide, the viscosity from low to high, from corrosive liquid to viscous liquid.
5. Diaphragm Pump is small, light and easy to move.

Applicable industries:
Used for water-based ink printing machine, gravure printing, flexo printing and composite glue machine and the liquid with particle, all kinds of the cycle of flammable liquid delivery system.
 

Place of Origin: Guangdong
Product Name: Single Way Pneumatic Diaphragm Pump
Model Number:BML-5
Material: Aluminum Alloy, Cast Iron, Stainless Steel
Material of diaphragm: PTFE
Caliber diameter inlet or outlet: 1/4"
Flux: 10L/Min
Solid particle limit: 2mm
The Max. air supply pressure: 0.5Mpa

Accessories:
1. Inlet or outlet PV Tube: 2m(Respectively)
2. A strainer set,
3. A G shaped fixation clamp

 

Flux	10L/min	Screw Thread	BSPT
Adsorption Distance	2m	Liquid Inlet caliber	1/4″
Distance	4m	Liquid Outlet  caliber	1/4″
Max. Discharge Press	0.5Mpa	Air Interface	1/4″
Solid Particle Limit	2mm	Color	Silver
Using Air Pressure Range	0.2-0.5Mpa	Model Number	BML-5
Material of  Pump's Body	Aluminum alloy	Material of Diaphragm	PTFE

Accessories can be bought and sold again
Please select the number you need from the picture and tell me to quote for you